Service manual

2
2-42
Intrepid® 6140 Director Installation and Service Manual
Installation Tasks
Task 9: Configure Windows Operating System Users
Configure password access for all authorized Windows (server)
users. It is also recommended to change the default administrator
password. To configure users:
1. At the Windows desktop, click Start attheleftsideofthetaskbar
(bottom of the desktop), then sequentially select Settings, Control
Panel,andUsers and Passwords.TheUsers and Passwords dialog
box displays.
2. The Guest user name is a built-in account in the Windows
operating system and cannot be deleted. The srvacc account is for
field service users and must not be modified or deleted.
Change Default Administrator Password
To changethe administrator passwordfromthe default (password)to
a customer-specified password:
1. At the Users and Passwords dialog box, click Set Password.TheSet
Password dialog box displays.
2. At the New Password and Confirm New Password fields,typethe
new password. Both fields are case-sensitive.
3. Click OK. The default administrator password changes and the
Set Password dialog box closes.
Add a New User
To set up a new Windows user:
1. At the Users and Passwords dialog box, clickAdd.Thefirstwindow
of the Add New User wizard displays (Figure 2-19).
2. Type the appropriate information in theUser name and Domain
fields and click Next. The second window of the Add New User
wizard displays.
3. Typethe new userpassword in the Password andConfirm password
fields and click Next. The third window of the Add New User
wizard displays.