Service manual

Intrepid® 6140 Director Installation and Service Manual
viii
Contents
Port LED Diagnostics..............................................................4-11
Element Manager Application Diagnostics.........................4-12
EFCM Basic Edition Diagnostics...........................................4-17
Performing Loopback Tests...........................................................4-21
Internal Loopback Test (Element Manager Application)..4-21
External Loopback Test (Element Manager Application).4-23
Internal Loopback Test (EFCM Basic Edition)....................4-24
External Loopback Test (EFCM Basic Edition)...................4-26
Blocking and Unblocking Ports....................................................4-27
BlockorUnblockaPortorPortCard(ElementManagerAp-
plication)...................................................................................4-27
Block or Unblock a Port (EFCM Basic Edition)...................4-28
Swapping Ports...............................................................................4-29
Performing Channel Wrap Tests (FICON)..................................4-31
Collecting Maintenance Data........................................................4-32
Collecting Maintenance Data (Element Management Appli-
cation)........................................................................................4-32
Collecting Maintenance Data (EFCM Basic Edition)..........4-33
Powering the Director On or Off..................................................4-34
Power-On Procedure ..............................................................4-34
Power-Off Procedure..............................................................4-35
Setting the Director Online or Offline..........................................4-36
Set Online or Offline (Element Manager Application) ......4-36
Set Online or Offline (EFCM Basic Edition) ........................4-37
IML, IPL, or Reset the Director.....................................................4-38
IML the Director (CTP Front Panel) .....................................4-38
IPL the Director (Element Manager Application) ..............4-39
Reset the Director (CTP Front Panel) ..................................4-39
Cleaning Fiber-Optic Components ..............................................4-40
Downloading Director Firmware and Software ........................4-41
Download Firmware and Software from Filecenter ..........4-42
Download Firmware and Software to Director (Element
Manger Application)...............................................................4-44
Download Firmware and Software to Director (EFCM Basic
Edition)......................................................................................4-46
Installing or Upgrading Software.................................................4-47
Managing Configuration Data......................................................4-50
Back Up Configuration (Element Manager Application)..4-50
Restore Configuration (Element Manager Application)....4-50
Reset Configuration Data (Element Manager Application).....
4-51
Back Up Configuration (EFCM Basic Edition)....................4-54
Restore Configuration (EFCM Basic Edition)......................4-54