Service manual

2
Installation Tasks
2-37
Installation Tasks
1. At the management server LCD panel, press ENTER.The
Welcome!! or operational information message changes to an
Input Password 0**** message.
2. Inputthedefaultpassword(9999), and press ENTER.ALAN 1
Setting?? message appears at the LCD panel.
3. Press the down-arrow button several times until the Change
Password? option appears at the LCD panel, then press ENTER.
A New Password 0**** message appears.
4. Input a new 4-digit numeric password, then press ENTER.A
Save Change? Yes, Save!! message appears.
5. Press ENTER.AWait a moment! message appears at the LCD
panel, the LCD panel returns to the LAN 1 Setting?? message,
and the password changes.
Configure Private LAN Addresses
To configure TCP/IP network information for the private LAN
connection (LAN 2):
1. At the management server LCD panel, press ENTER.The
Welcome!! or operational information message changes to an
Input Password 0**** message.
2. Input the default or changed password, and press ENTER.The
LAN 1 Setting?? message appears at the LCD panel.
3. Press the down-arrow button. The LAN 2 Setting?? message
appears at the LCD panel. Press ENTER and the default IP
address of 10.1.1.1 appears.
4. Input a new IP address, then press ENTER.ASave Change? Yes,
Save!! message appears.
5. Press ENTER. The LAN 2 IP address changes and the default
subnet mask of 255.0.0.0 appears.
6. Input a new subnet mask, then press ENTER.ASave Change?
Yes, Save!! message appears.
7. Press ENTER.AWait a moment! message appears at the LCD
panel, the panel returns to the LAN 1 Setting?? message, and the
LAN 2 subnet mask changes.
8. Record the private LAN IP address and subnet mask for
reference.