Service manual

2
Installation Tasks
2-35
Installation Tasks
4. Connect the server to the Ethernet LAN segment or Ethernet hub
(private LAN interface):
a. Connect one end of the Ethernet patch cable (supplied) to the
right RJ-45 adapter (LAN 2)attherearoftheserver
(Figure 2-16).
Figure 2-16 1U Management Server Connections
b. Connect the remaining end of the Ethernet cable to the LAN:
• If the server is installed on a LAN segment, connect the
cable to the LAN as directed.
• If the server is installed through the Ethernet hub, connect
the cable to any available hub port.
5. If required, connect the server to the customer intranet (public
LAN interface):
a. Connect one end of an Ethernet patch cable to the left RJ-45
adapter (LAN 1)attherearoftheserver(Figure 2-16).
b. Connect the remaining end of the Ethernet cable to the
corporate intranet.
6. Connect a phone cord to the left RJ-11 adapter (LINE)attherear
of the server and a facility telephone connection (Figure 2-16).
7. Connect the AC power cord to the server and a facility power
source or rack power strip that provides single-phase, 90 to 264
VAC current (Figure 2-16).