Service manual

vii
Contents
Contents
Task 17: Configure Management Server (Optional)..................2-53
Task 18: Set Director Date and Time............................................2-54
Task 19: Configure the Element Manager Application.............2-55
Configure Director Identification.........................................2-56
Configure Director Parameters.............................................2-56
Configure Fabric Parameters.................................................2-58
Configure Ports.......................................................................2-60
Configure SNMP.....................................................................2-61
Configure Threshold Alerts...................................................2-62
Enable EFCM Basic Edition and Telnet Access..................2-65
Configure, Enable, and Test E-mail Notification ...............2-65
Configure and Enable Ethernet Events................................2-67
Configure, Enable, and Test Call-Home Event Notification....
2-67
Configure Security..................................................................2-68
Configure Interswitch Links..................................................2-69
Task 20: Back Up Configuration Data.........................................2-70
Task 21: Cable Fibre Channel Ports .............................................2-73
Task 22: Configure Zoning (Optional) ........................................2-73
Task 23: Connect Director to a Fabric Element (Optional).......2-74
Task 24: Register with the McDATA Filecenter .........................2-75
Chapter 3 Maintenance Analysis Procedures (MAPS)
Factory Defaults ...............................................................................3-1
Quick Start.........................................................................................3-2
MAP 0000: Start MAP......................................................................3-8
MAP 0100: Power Distribution Analysis....................................3-13
MAP 0200: POST Failure Analysis ..............................................3-16
MAP 0300: Loss of Server Communication................................3-20
MAP 0400: FRU Failure Analysis.................................................3-30
MAP 0500: Port Failure or Link Incident Analysis....................3-34
MAP 0600: Fabric or ISL Problem Analysis ...............................3-48
Chapter4 RepairInformation
Factory Defaults........................................................................4-2
Procedural Notes.......................................................................4-2
Obtaining Log Information.............................................................4-3
SAN Management Logs...........................................................4-3
Element Manager Logs ............................................................4-5
EFCM Basic Edition Logs.........................................................4-8
Obtaining Port Diagnostic Information...................................... 4-11