Service manual

2
2-16
Intrepid® 6140 Director Installation and Service Manual
Installation Tasks
g. At the Preferred Domain ID field, type a value between 1
through 31. Thisvalue uniquely identifies eachfabric element.
NOTE: An ISL between fabric elements with identical domain IDs
segments and prevents communication.
h. Atthe ISL FSPF CostConfigurationfield, select Default or Equal.
to calculate fabric shortest path first (FSPF) cost.
• By Port Speed - The fastest fabric path is determined by
port (ISL) speed. FSPF cost is inversely proportional to ISL
speed.
• Ignore Port Speed - ISL speed is ignored, and the fastest
fabric pathis determined bythe number of hops.FSPF cost
is directly proportional to hop count.
3. Click OK to save and activate changes.
4. Set the director online (Setting the Director Online or Offline on
page 4-36).
Configure Fabric Parameters
Perform this procedure to configure fabric operating parameters.
1. Set the director offline (SettingtheDirectorOnlineorOfflineon
page 4-36).
2. Select Switch andFabricParameters fromthe Configuremenuatany
view. The Fabric Parameters View displays (Figure 2-7).
Figure 2-7 Fabric Parameters View