Service manual

2
2-14
Intrepid® 6140 Director Installation and Service Manual
Installation Tasks
1. Select Switch and Date & Time from the Configure menu at any
view. The Date Time View displays (Figure 2-5).
a. Click Date fields that require change, and type numbers in the
following ranges:
•Month(MM): 1 through 12.
•Day(DD): 1 through 31.
•Year(YYYY): greater than 1980.
b. Click Time fields that require change, and type numbers in the
following ranges:
•Hour(HH): 0 through 23.
•Minute(MM): 0 through 59.
•Second(SS): 0 through 59.
2. Click OK to save and activate changes.
Figure 2-5 Date Time View
Configure Parameters
Perform this procedure to configure director operating parameters.
1. Set the director offline (SettingtheDirectorOnlineorOfflineon
page 4-36).
2. Select Switchand Parametersfromthe Configure menu at any view.
The Parameters View displays (Figure 2-6).