Service manual

2
Installation Tasks
2-13
Installation Tasks
Configure Director Identification
Perform this procedure to configure the director identification. The
Name, Location,andContact variables correspond respectively to the
SNMP variablessysName,sysLocation,andsysContact,andareusedby
management workstations when obtaining director data.
1. Select Switch and Identification from the Configure menu at any
view. The Identification View displays (Figure 2-4).
a. Type a unique director name of 24 alphanumeric characters or
less in the Name field. If installedon a public LAN, the name
should reflect the director Ethernet network domain name
system (DNS) host name.
b. Type a director description of 255 alphanumeric characters or
less in the Description field.
c. Type the director physical location (255 alphanumeric
characters or less) in the Location field.
d. Typethenameofacontactperson(255alphanumeric
characters or less) in the Contact field.
2. Click OK to save and activate changes.
Figure 2-4 Identification View
Configure Date and Time
Perform this procedure to configure director date and time.