Service manual

2
2-12
Intrepid® 6140 Director Installation and Service Manual
Installation Tasks
2. Connect theremaining end ofthe Ethernet cable tothe Internet or
LAN segment as directed by the customer. If the hub installed in
Task 2: Unpack, Inspect, and Install the Ethernet Hub (Optional)
provides connectivity, connect the cable to any available hub port.
3. At the PC, launch the browser application (Internet Explorer or
Netscape Navigator).
4. Enter the default Internet Protocol (IP) address of the director
(10.1.1.10) as the uniform resource locator (URL). The Enter
Network Password dialog box displays.
5. Type the case-sensitive default user name (Administrator)and
password (password) and click OK.TheFirst Time Login View
displays.
6. Type customer-specified values in the User Name, New Password,
and Confirm Password fields, then click Activate.TheTopology View
displays with status information about each fabric element,
including the director to be configured.
7. Click Switch Details.TheHardware View displays.
8. Selectively perform the following tasks according to customer
requirements:
• Product - includes identification, date and time, parameters,
fabric parameters, and network addresses.
• Ports - includes basic information, buffer-to-buffer credits
(BB_Credits), and N_Port identifier virtualization (NPIV).
• Management - includes SNMP trap message recipients,
command line interface (CLI), open systems management server
(OSMS), secure socket layer (SSL) encryption.
• Options - includes product feature enablement (PFE) keys.
• Security - includes SANtegrity authentication (settings, access
control list, and remote authentication dial-in user service
(RADIUS) server support), Enterprise Fabric Mode, and
SANtegrity binding (fabric, switch, and port binding).
• Interswitch links - includes OpenTrunking, preferred path, and
interswitch link (ISL) port fencing.