Service manual

i-7
Index
Index
G
g_port
UPM card 1-7
XPM card 1-8
gateway address
change director address 2-18, 2-30
default 4-2, 5-1
director default 2-1, 3-1
management server default 2-49
grounding point
front 5-4
H
hardware log 4-5
hardware view
displaying director information 4-21
heat dissipation, director B-1
hexagonal adapter 1-15
humidity
operating environment B-2
shipping and storage environment B-2
HyperTerminal 1-18
I
identification
configure
EFCM Basic Edition 2-13
Element Manager 2-56
illustrated parts breakdown 6-1
IML 1-5, 4-38
inclination, maximum, director B-2
input filter 1-11
insistent domain ID 2-15, 2-57
installation tasks
summary 2-3
Task 1 - Verify installation requirements 2-5
Task 10 - Set management server date and
time 2-44
Task 11 - Configure the call-home feature
(optional) 2-46
Task 12 - Assign user names and passwords
2-47
Task 13 - Configure the product to the
management application 2-48
Task 14 - Record or verify server restore
information 2-49
Task 15 - Verify product-to-server
communication 2-50
Task 16 - Configure PFE key (optional) 2-51
Task 17 - Configure management server
(optional) 2-53
Task 18 - Set product date and time 2-54
Task 19 - Configure the Element Manager
application 2-55
Task 2 - Unpack, inspect, and install the
Ethernet hub (optional) 2-5
Task 20 - Back up configuration data 2-70
Task 21 - Cable Fibre Channel ports 2-73
Task 22 - Configure zoning (optional) 2-73
Task23 - Connectproduct toa fabricelement
(optional) 2-74
Task 24 - Register with the McDATA
filecenter 2-75
Task 3 - Unpack, inspect, and install the
product 2-9
Task 4 - Configure product at the EFCM
Basic Edition interface (optional)
2-11
Task 5 - Configure product network
information (optional) 2-30
Task 6 - Unpack, inspect, and install the
management server 2-34
Task 7 - Configure server password and
network addresses 2-36
Task 8 - Configure management server
information 2-38
Task 9 - Configure Windows operating
system users 2-42
installing software 4-47
internal loopback test
EFCM Basic Edition 4-24
International Electrotechnical Commission,
compliance -xx
interop mode 2-17, 2-59
interswitch link
configure performance features
Element Manager 2-69
SAN management application 2-69
fault isolation 3-48
OpenTrunking 2-69
port fencing 2-70