Service manual

Intrepid® 6140 Director Installation and Service Manual
i-6
Index
fabric log 4-4
EFCM Basic Edition 4-10
fabric parameters
configure
EFCM Basic Edition 2-16
Element Manager 2-58
Fabricenter cabinet 1-1
door key 1-16
service clearances B-3
Fabricenter equipment cabinet
Ethernet hub installation 2-8
management server installation 2-34
failover, SBAR assembly 1-11
fan module 1-11
removing and replacing 5-30
fan module events, event codes A-30
fault isolation
logs 4-3
MAP 0000 - Start MAP 3-8
MAP 0100 - Power distribution analysis 3-13
MAP 0200 - POST failure analysis 3-16
MAP 0300 - Loss of server communication
3-20
MAP 0400 - FRU failure analysis 3-30
MAP 0500 - Port failure or link incident
analysis 3-34
MAP 0600 - Fabric or ISL problem analysis
3-48
summary 3-2
FC fabric element MIB, version 1-14
FC-512 Fabricenter cabinet 1-1
FCC, compliance -xx
FC-PH 4.3 1-1
Federal Communications Commission,
compliance -xx
fenced E_Port
fault isolation 3-48
fiber-optic
cleaning kit 1-18
components, cleaning 4-40
protective plug 1-16
transceivers, types of 1-9
Fibre Alliance MIB 1-14
fibre channel
physical and signalling interface 1-1
FICON
channel wrap tests
procedure 4-31
swapping ports, procedure 4-29
field-replaceable units
See FRUs
filecenter
registration 2-75
firmware
versions, managing 4-41
FL_Port
configure 2-19, 2-60
FLASH memory 4-32
Flexport Technology
configure PFE key
EFCM Basic Edition 2-26
front bezel 1-5
front-accessible FRUs, parts list 6-3
FRUs
AC module 1-11
backplane 1-12
concurrent 5-5
CTP card 1-5
description 1-4
ESD precautions -xxii, 5-2
fan module 1-11
front access, illustration 1-4
front-accessible 6-2
parts list 6-3
illustrations 6-1
nonconcurrent 5-5
power supply 1-10
Power/System Power LED Assembly 1-5
rear access, illustration 1-5
rear-accessible 6-4, 6-7
parts list 6-5, 6-6, 6-8
removals and replacements, hardware log
4-5
removing and replacing 5-3
SBAR assembly 1-11
serial number, hardware log 4-6
UPM card 1-6
XPM card 1-6
full-volatility
configure PFE key
EFCM Basic Edition 2-26
Element Manager 2-52
full-volatility feature
description 4-32