Service manual

1
1-18
Intrepid® 6140 Director Installation and Service Manual
General Information
• Maintenance terminal (desktop or notebook PC) - The PC is
required to configure director network addresses and acquire
event log information through the maintenance port. The PC
must have:
— The Microsoft Windows 98, Windows2000, Windows XP, or
Millennium Edition operating system installed.
— RS-232 serial communication software (such as ProComm
Plus™ or HyperTerminal) installed. HyperTerminal is
provided with Windows operating systems.
• Fiber-optic cleaning kit - The kit contains tools and instructions
to clean fiber-optic cable, connectors, loopback plugs, and
protective plugs.
Director Management
Thedirectorismanagedandcontrolledthrougha:
• Management server running aSAN management application that
provides a central point of control for up to 48 directors or
managed products.
The management server is delivered with a serverand client SAN
management application (SANavigatoror EFCM) and the
Intrepid 6140 Element Manager application installed. A
customer-supplied PC or workstation (with client applications
installed) communicates with the server through a through a
corporate intranet.
• Customer-supplied PC platform with an Internet connection to
the EFCM Basic Edition interface on the director. Using this
graphical user interface (GUI), operators can quickly view
director status.
The interface allows service personnel to perform configuration
tasks, view system alerts and related log information, and
monitor director status, port status, and performance. FRU status
and system alert information are highly visible.
• Customer-supplied PC or UNIX-based platform with the server
and client SANavigator and Intrepid 6140 Element Manager
applications installed.