Service manual

D-2

Intrepid® 6140 Director Installation and Service Manual

Restore Management Server

• SAN management data directory backup on CD-ROM - The

SAN management data directory is automatically backed up to a

CD when the management server is rebooted or when the data

directory contents change. The data directory includes:

— All configuration data (product definitions, user names,

passwords, user rights, nicknames, session options, SNMP

trap recipients, E-mail recipients, and Ethernet event

notifications).

— All log files (SAN management application and Element

Manager logs).

— Zoning library (all zone set and zone definitions).

— Firmware library.

— Call-home settings.

— Configuration data for each managed director (stored on the

server and in NV-RAM on each director or switch).

• Windows 2000 configuration information - Windows 2000

network addresses, date and time information, user information,

and the product identification are recorded during installation of

the management server.

Restore Management Server Procedure

To restore the management server:

1. At the server, press theleft edge (PUSHlabel)of the LCDpanelto

disengage the panel and expose the CD-RW drive.

2. Insert the Management Server Restore CD-ROM in the CD-RW

driveandclosetheLCDpanel.

ATTENTION! This procedure deletes all data from the C: hard drive

partition.

3. Press the power ( ) button. The server powers on and performs

a restore from the CD-ROM.

4. After the restore completes, the server makes a series of beeps.

Remove theManagement Server RestoreCD-ROM fromthe CD-RW

drive.