Service manual

1
1-14
Intrepid® 6140 Director Installation and Service Manual
General Information
• SNMP management using the Fibre Channel Fabric Element MIB
(Version 1.1), transmission control protocol/internet protocol
(TCP/IP) MIB-II definition (RFC 1157), or a product-specific
privateenterpriseMIBthatrunsoneachdirector.Uptosix
authorized management workstations can be configured through
the ElementManagerapplication orEFCM BasicEdition interface
to receive unsolicited SNMP trap messages. The trap messages
indicate operational state changes and failure conditions.
• SNMP management using the Fibre Alliance MIB (Version 3.1)
that runs on the management server. Up to 12 authorized
management workstations can be configured through the SAN
management application to receive unsolicited SNMP trap
messages. The trap messages indicate operational state changes
and failure conditions.
Element Manager Status Indicators
In addition to the visual indicators on the director chassis, the
Element Manager application presents alert symbols and messages
that describe the condition of the director and its FRUs. These alert
symbols, messages, and a description are summarized in Table 1-1.
Table 1-1 Element Manager Alert Symbols, Messages, and Status
Symbol Message Description
Fully operational All components and installed ports are operational.
Redundant failure A redundant component has failed, and the backup
component has taken over.
Minor failure A failure has occurred that has decreased the
director operational capability, but has not affected
normal switching operations.
Major failure Power supplies have failed.