Service manual

A
SBAR Events (600 through 699)
A-63
Event Code Tables
Event Code: 604
Message: SBAR failure.
Severity: Major.
Explanation: The indicated SBAR failed. If the active SBAR fails, the backup SBAR takes over operation. If the backup SBAR
fails, the active SBAR is not impacted.
Action: Replace the failed SBAR with a functional assembly. Perform the data collection procedure and return the CD
and faulty assembly to McDATA support personnel.
Event Data: Byte 0 = SBAR slot position.
Byte 1 = engineering failure reason code.
Bytes 4 - 7 = elapsed millisecond tick count.
Bytes 8 - 11 = event code specific data.
Distribution: Director Management Server Host
Nonvolatile
System
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident
Event Code: 605
Message: SBAR revision not supported.
Severity: Minor.
Explanation: The indicated SBAR is not recognized and appears uninstalled to the director firmware.
Action: Ensure the director model supports the operating firmware version. If the firmware version is supported, replace
the SBAR with a functional assembly. Perform the data collection procedure and return the CD and faulty
assembly to McDATA support personnel.
Event Data: Byte 0 = SBAR slot position.
Bytes 4 - 7 = elapsed millisecond tick count.
Bytes 8 and 9 = detected module identifier.
Distribution: Director Management Server Host
Nonvolatile
System
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident