Service manual

A
Port Card (UPM and XPM) Events (500 through 599)
A-51
Event Code Tables
Event Code: 504
Message: Port module failure.
Severity: Major.
Explanation: The indicated UPM failed.
Action: Replace the indicated UPM with a functional UPM of the same type. Perform the data collection procedure and
return the CD and faulty card to McDATA support personnel.
Event Data: Byte 0 = UPM slot position.
Byte 1 = engineering reason code.
Bytes 4 - 7 = elapsed millisecond tick count.
Bytes 8 - 11 = reason code specific data.
Distribution: Director Management Server Host
Nonvolatile
System
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident
Event Code: 505
Message: Port module revision not supported.
Severity: Minor.
Explanation: The indicated UPM is not recognized and the four ports appear uninstalled to the director firmware.
Action: Ensure the director model supports the operating firmware version. If the firmware version is supported, replace
the UPM with a functional card. Perform the data collection procedure and return the CD and faulty card to
McDATA support personnel.
Event Data: Byte 0 = UPM slot position.
Bytes 4 - 7 = elapsed millisecond tick count.
Bytes 8 and 9 = detected module identifier.
Distribution: Director Management Server Host
Nonvolatile
System
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident