Service manual

A
A-46
Intrepid® 6140 Director Installation and Service Manual
Event Code Tables
Event Code: 433
Message: Non-recoverable Ethernet fault.
Severity: Major.
Explanation: A non-recoverable error was detected on the CTP card Ethernet adapter and the LAN connection to the
management server or Internet terminated. All Fibre Channel switching functions remain unaffected. This event
only occurs on a director with a single CTP card. Because Ethernet communication is lost, no failure indication is
externally reported.
Action: Replace the CTP card with a functional card. Perform the data collection procedure and return the CD and faulty
card to McDATA support personnel.
Event Data: Bytes 0-3= LAN error type, where 01 = hard failure and 04 = registered fault.
Bytes 4-7= LAN error subtype (internally defined).
Bytes 8-11= LAN fault identifier (internally defined).
Distribution: Director Management Server Host
Nonvolatile
System
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident
Event Code: 440
Message: Embedded port hardware failed.
Severity: Major.
Explanation: The embedded port hardware detected a fatal CTP card error.
Action: Replace the indicated CTP card with a functional card. Perform the data collection procedure and return the CD
and faulty card to McDATA support personnel.
Event Data: Byte 0 = CTP slot position.
Byte 1 = engineering reason code
Bytes 4 - 7 = elapsed millisecond tick count.
Distribution: Director Management Server Host
Nonvolatile
System
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident