Service manual

A
CTP Card Events (400 through 499)
A-45
Event Code Tables
Event Code: 426
Message: Multiple ECC single-bit errors occurred.
Severity: Minor.
Explanation: When the SDRAM controller detects an error checking and correction (ECC) error, an interrupt occurs. If an
interrupt occurs a certain number of times weekly, a 426 event code is recorded. The number of interrupts is
indicated by the event data.
Action: No action required. SDRAM is probably malfunctioning intermittently.
Event Data: Byte 0 of the event data (equal to 5, 10, 15,or20) is recorded. The number of interrupts equals two to the power
of the event data. Event data equal to 10 indicates 1,024 ECC error interrupts.
Distribution: Director Management Server Host
Nonvolatile
System
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident
Event Code: 427
Message: Utility bus error detected by backup CTP.
Severity: Major.
Explanation: Backup CTP is unable to communicate with one or more port modules due to errors in its utility bus. Director may
not be fully operational if backup CTP becomes master CTP.
Action: Replace the indicated CTP card with a functional card. Perform the data collection procedure and return the CD
and faulty card to McDATA support personnel.
Event Data: Each byte of data represents the ID of the port module with which the backup CTP was unable to communicate.
Distribution: Director Management Server Host
Nonvolatile
System
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident