Service manual

A
CTP Card Events (400 through 499)
A-39
Event Code Tables
Event Code: 411
Message: Firmware fault.
Severity: Major.
Explanation: Firmware executing on the indicated CTP card encountered an unexpected operating condition and dumped the
operating state to FLASH memory for retrieval and analysis. The dump file is automatically transferred from the
director to the management server, where it is stored for retrieval through the data collection procedure.
A non-disruptive failover to the backup CTP card occurs. When the dump and subsequent IPL complete, the
faulty CTP card re-initializes to become a the backup.
Action: Perform the data collection procedure and return the CD to McDATA support personnel.
Event Data: Bytes 0 - 3 = fault identifier, least significant byte first.
Distribution: Director Management Server Host
Nonvolatile
System
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident
Event Code: 412
Message: CTP watchdog timer reset.
Severity: Informational.
Explanation: The hardware watchdog timer expired and caused the CTP card to reset.
Action: Perform the data collection procedure and return the CD to McDATA support personnel.
Event Data: Byte 0 = reset type as follows: 00 = task switch did not occur within approximately one second,
01 = interrupt servicing blocked for more than approximately one second.
Distribution: Director Management Server Host
Nonvolatile
System
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident