Service manual

A
System Events (000 through 199)
A-25
Event Code Tables
Event Code: 151
Message: Fabric configuration failure.
Severity: Informational.
Explanation: A fabric-wide configuration activation failed. For example, a zone set activation.
An event 151 is only logged by the managing switch. It is intended to detect and log errors that occur on the
managing switch in the fabric when fabric configuration failures are detected. It is intended to help engineering
personnel determine the cause of fabric-configuration failures.
The event 151 is only possible in EOS versions 5.1 and above. All data values of the event are in big-endian
notation, regardless of the embedded processor. All data values are hexadecimal and range from 0x00000000
and 0x000000FF.
Action: Depends on the failure reason. In most cases, perform the data collection procedure on the managing switch and
the managed switch, and return the CD to McDATA support personnel.
Event Data: Reason codes were mapped from the software implementation (FC-SW2 protocol) so decoding them is
complicated and may require engineering assistance.
Bytes 0 - 3 = managing switches domain ID in internal format (1 - 31).
Bytes 4 - 7 = fabric configuration operation that failed.
Bytes 8 - 11 = fabric configuration step that failed.
Bytes 12 - 15 = managed switch domain ID in internal format (1 - 31).
Bytes 16 - 19 = response command code received from managed switch.
Bytes 20 - 23 = response code received from the managed switch.
Bytes 24 - 27 = reason code received from the managed switch.
Bytes 28 - 31 = error code received from the managed switch.
Distribution: Director Management Server Host
Nonvolatile
System
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident