Service manual

A
System Events (000 through 199)
A-21
Event Code Tables
Event Code: 120
Message: Error detected while processing system management command.
Severity: Informational.
Explanation: This event occurs when the director receives an SAN management command that violates specified boundary
conditions, typically as a result of a network error. The director rejects the command, drops the
director-to-management server Ethernet link, and forces error recovery processing. When the link recovers, the
command can be retried.
Action: No action is required for an isolated event. If this event persists, perform a data collection for this director using
the SAN management application. Save the data file to the management server CD drive, and return the CD to
McDATA support personnel.
Event Data: No supplementary data included with the event.
Distribution: Director Management Server Host
Nonvolatile
System
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident
Event Code: 121
Message: Zone set activation failed - zone set too large.
Severity: Informational.
Explanation: This event occurs when the director receives a zone set activation command that exceeds the size supported by
the director. The director rejects the command, drops the director-to-management server Ethernet link, and
forces error recovery processing. When the link recovers, the command can be modified and retried.
Action: Reduce the size of the zone set to conform to the limit specified, then retry the activation command.
Event Data: No supplementary data included with the event.
Distribution: Director Management Server Host
Nonvolatile
System
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident