Service manual

A
System Events (000 through 199)
A-19
Event Code Tables
Event Code: 083
Message: Port inactive—port set to inactivate state (Release 8.0)
Severity: Informational.
Explanation: The port has been set to an inactive state because a hardware configuration or software issue is preventing the
port from coming online. The inactive reason code is indicated in the event data.
Action: Use the reason code to determine the action.
Event Data: The first byte of event data (byte 0) specifies the port number. The second byte (byte 1) specifies the inactive
reason code as follows:
2 = Feature key not enabled - The optional flexport PFE key is not enabled.
3 = Switch speed conflict - The port cannot operate at the configured product (backplane or CTP Card) speed.
4 = Optics speed conflict - The port transceiver does not support the configured port speed.
5 - No SBAR - A serial crossbar (SBAR) is not installed. Not applicable to 4000-series fabric switches.
6 = Port swap conflict - The port swap configuration is invalid.
Distribution: Director Management Server Host
Nonvolatile
System
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident