Service manual

A
A-12
Intrepid® 6140 Director Installation and Service Manual
Event Code Tables
Event Code: 072
Message: E_Port connected to unsupported switch.
Severity: Informational.
Explanation: The director is attached (through an ISL) to an incompatible fabric element (director or switch).
Action: Disconnect the ISL.
Event Data: No supplementary data included with this event.
Distribution: Director Management Server Host
Nonvolatile
System
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident
Event Code: 073
Message: Fabric initialization error.
Severity: Informational.
Explanation: An error was detected during the fabric initialization sequence, most likely caused by frame delivery errors. Event
data is intended for engineering evaluation.
Action: Perform the data collection procedure and return the CD to McDATA support personnel.
Event Data: Byte 0 = error reason code for engineering evaluation.
Bytes 4 - 9 = port numbers for which problems were detected.
Distribution: Director Management Server Host
Nonvolatile
System
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident