Service manual

5
5-22
Intrepid® 6140 Director Installation and Service Manual
Removal and Replacement Procedures (RRPs)
Figure 5-5 Filler Panel Removal and Replacement
Replacement To replace a filler panel:
1. Remove the filler panel from its packaging.
2. Hold the filler panel by its stiffener and insert it in the chassis
card track (Figure 5-5).
3. To secure the filler panel, sequentially insert the torque tool into
each locking Allen screw. Turn each screw clockwise until you
feel the torque tool release and hear a clicking sound. As each
screw turns clockwise, the filler panel locks into place.
4. Verify the filler panel stiffener is flush with the front of the card
cage and even with other director logic cards.
5. If necessary, replace the RFI shield.
6. If necessary, close and lock the equipment cabinet door.