Service manual

5-2

Intrepid® 6140 Director Installation and Service Manual

Removal and Replacement Procedures (RRPs)

Procedural Notes

NOTE: The screens in this manual may not match the screens on your server

and workstation. The title bars have been removed and the fields may

contain data that does not match the data seen on your system.

The following procedural notes are referenced as applicable. The

notes do not necessarily apply to all procedures in the chapter.

1. Before performing a FRU repair, read the removal and

replacement procedures for that FRU carefully and thoroughly to

familiarize yourself with the procedures and reduce the

possibility of problems or customer down time.

2. Follow all electrostatic discharge (ESD) procedures, DANGER

and CAUTION statements, and statements listedin the preface of

this manual.

3. After completing the steps of a detailed procedure that is

referenced from another procedure, return to the initial

(referencing) procedure and continue to the next step of that

procedure.

4. After completing a replacement procedure, clear the event code

reporting the failure and the event code reporting the recovery

from the Event Log (at the management server or EFCM Basic

Edition interface), and extinguish the amber system error light-

emitting diode (LED) at the director front bezel.