Service manual

Removal and Replacement Procedures (RRPs)
5-1
5
Removal and
Replacement Procedures
(RRPs)
This chapter describes removal and replacement procedures (RRPs)
used by authorized service representatives for all Intrepid 6140
Director field-replaceable units (FRUs). Do not perform a procedure
inthischapteruntila failureis isolatedtoa FRU.Iffaultisolationwas
not performed, go to Chapter 3, Maintenance Analysis Procedures
(MAPS).
Factory Defaults
Table 5-1 lists the defaults for the passwords, and IP, subnet, and
gateway addresses.
Table 5-1 Factory-Set Defaults
Item Default
Customer password password
Maintenance password level-2
IP address 10.1.1.10
Subnet mask 255.0.0.0
Gateway address 0.0.0.0