Service manual

4
Installing or Upgrading Software
4-47
Repair Information
5. Click OK todownloadthefirmwareto thedirector.Thedownload
takes several minutes, during which the browser is unavailable.
6. When the process completes, the message "Firmware
successfully received and verified. Your browser connection
will be unavailable until unit restart is complete" displays.
7. After verification, the director performs an IPL that takes
approximately 30 seconds. During the IPL, the
browser-to-director Internet connection drops momentarily and
the EFCM Basic Edition session is lost.
8. After the directorIPL andEFCM Basic Edition session logout, the
message "Firmware upgrade complete. Click here
to login"
displays.
9. Click here to login to the director and start a new EFCM Basic
Edition session. The Enter Network Password dialog box displays.
10. Type the default user name and password.
NOTE: The default user name is Administrator and the default
password is password. The user name and password are case-sensitive.
11. Click OK. The EFCM Basic Edition interface opens with the
Hardware View panel displayed.
Installing or Upgrading Software
The delivered SAN management application is provided on the EFC
Management Applications CD-ROM. Subsequent software versions for
upgrade are provided to customers through the McDATA Filecenter.
NOTE: When upgrading software, follow all procedural information
contained in release notes or EC instructions that accompany the version.
Such information supplements information provided in this general
procedure.
To install or upgrade the SAN management application:
1. Close and exit all applications on the management server, then
perform one of the following:
— Insert the EFC Management Applications CD-ROM into the
CD-ROM drive of the server.