Service manual

4
4-30
Intrepid® 6140 Director Installation and Service Manual
Repair Information
Figure 4-8 Swap Ports Dialog Box
2. Select the radio button associated with the product management
style and enter the decimal port numbers (open systems style) or
hexadecimal port addresses (FICON style) of the ports to be
swapped. The FC Address fields update dynamically.
3. Click Next.TheInstructions section of the dialog box indicates the
ports will be blocked.
4. Notify the customer that a port swap will be performed. Ensure
the system administrator quiesces Fibre Channel frame traffic
through the ports, varies any attached host offline, and sets any
attached device offline.
5. Click Next.Beaconing is enabled for bothports and bothportsare
blocked. Swap the port fiber-optic cables as directed by the
system administrator.
6. Click Next.TheInstructions section of the dialog box indicates the
port swap operation iscomplete and beaconing is disabled. Select
each Unblock check box to unblock the ports, then click Finish.
7. Ensure the system administrator varies any attached host online
and sets any attached device online.
8. Back up the product configuration data (Back Up Configuration
(Element Manager Application) on page 4-50).