Service manual

4
4-28
Intrepid® 6140 Director Installation and Service Manual
Repair Information
• AcheckmarkappearsadjacenttotheBlock Port or Block All
Ports menu option.
— To unblock a port or port card: Select the Block Port or Block
All Ports menu option. Note the check mark in the box
adjacent to the menu item, indicating the port or port card is
blocked. A Warning dialog box displays. Click OK.Thedialog
box closes and the following occur to indicate the port is
unblocked and online:
• At the director, the green port (or ports) LED illuminates.
•AttheHardware View, the emulated green port (or ports)
LED illuminates.
• The box adjacent to the Block Port or Block All Ports menu
option becomes blank.
Block or Unblock a Port (EFCM Basic Edition)
To block or unblock a port from the EFCM Basic Edition interface:
1. At the EFCM Basic Edition interface, select Ports and Basic Info
from the Configure menu at any view. The Basic Information View
displays (Figure 4-7).