Service manual

4
Obtaining Port Diagnostic Information
4-13
Repair Information
Port List View
To open the Port List View,clickthePort List tab at any view
(Figure 4-1). A row of information for each port appears.
Figure 4-1 Port List View
The view provides the following information:
• Port # - The director port number.
• FC Addr - The director logical port address (hexadecimal format).
• Name - Theuser-definednameordescriptionfortheport.
• Block Config - Indicates if a port is blocked or unblocked.
• State - The port state (Online, Offline, Testing, Beaconing, Invalid
Attachment, Link Incident, LinkReset,No Light, NotOperational, Port
Failure, Segmented E_Port, or Te st i ng ).
• Type - The type of port (G_Port, F_Port, or E_Port).
• Operating Speed - The operating speed of the port (Not
Established, 2 Gbps, or 10 Gbps).
• Alert - If link Incident (LIN) alerts are configured, a yellow
triangle appears in the column when a link incident occurs. A
yellow triangle also appears if beaconing is enabled. A red and
yellow diamond appears if the port fails.
Performance View
To open the Performance View, click the Performance tab at any other
view.
Bar graphs at the top of the view display instantaneous transmit or
receive activity level for each port. The relative value displayed is the
greaterof thetransmitor receive activity. Eachgraph has20 green-bar