Service manual

xviii
Intrepid® 6140 Director Installation and Service Manual
Preface
Chapter 3, Maintenance Analysis Procedures (MAPS). This chapter
describes maintenance analysis procedures (MAPs) to fault
isolate a director problem to an individual FRU.
Chapter 4, Repair Information. This chapter describes
supplementary diagnostic and repair procedures for a failed
director. The chapter includes procedures to display and use log
information, perform port diagnostics, manage configuration
data, collect maintenance data, power-on, power-off, and initial
program load (IPL) the director, set the director online or offline,
block ports, manage director firmware, clean fiber optics, and
install or upgrade management server software.
Chapter 5, Removal and Replacement Procedures (RRPs).This
chapter describes procedures to remove and replace director
FRUs.
Chapter 6, Illustrated Parts Breakdown. This chapter illustrates,
describes, and shows the location of director FRUs. In addition,
FRUs are cross-referenced to corresponding part numbers.
Appendix A, Event Code Tables This appendix provides an
explanation of event codes that appear at the Element Manager
application. The event severity and a recommended course of
action in response to each event are also provided.
Appendix B, Director Specifications. This appendix provides the
director specifications including its physical characteristics, and
storage, shipping, and operating environments.
Appendix C, Management Server and Ethernet Hub. This appendix
provides the management-server specifications and a description
of the ethernet hub.
Appendix D, Restore Management Server This appendix provides
the instructions to restore all required director applications to the
management server in case of a hard drive failure.
Appendix E, Safety Notices (Multi-Lingual Translations) This
appendix provides the translation of the safety notices in this
publication.
AGlossarydefinesterms,abbreviations, andacronyms usedin the
manual. An Index is also provided.