Service manual

Maintenance Analysis Procedures
3-57
Maintenence Analysis Procedures
— SAN management application - Refer to the SANavigator
Software Release 4.2 User Manual
(621-000013) or EFC
Manager Software Release 8.7 User Manual
(620-000170)
for instructions.
— Element Manager - Refer to the
McDATA Intrepid 6140 and
6064 Directors Element Manager User Manual
(620-000153) for instructions.
b. Unblock the port (
Blocking and Unblocking Ports on page 4–27 ).
Was the maintenance action successful?
NO YES
↓ The fabric, ISL, and product are operational. Exit MAP.
Contact the next level of support. Exit MAP.
20
Port fencing threshold settings are too restrictive.
a. At the EFCM Basic Edition interface or SAN management
application, change port fencing threshold settings to more
lenient values as directed by the customer:
— EFCM Basic Edition - Refer to the
McDATA EFCM Basic
Edition User Manual
(620-000240) for instructions.
— SAN management application - Refer to the
SANavigator
Software Release 4.2 User Manual
(621-000013) or EFC
Manager Software Release 8.7 User Manual
(620-000170)
for instructions.
b. Unblock the port (
Blocking and Unblocking Ports on page 4–27 ).
Was the maintenance action successful?
NO YES
↓ The fabric, ISL, and product are operational. Exit MAP.
Contact the next level of support. Exit MAP.
21
Event codes occur only if the optional OpenTrunking feature is
enabled.
• Event code 140 - OpenTrunking firmware detected an ISL with
Fibre Channel traffic that exceeds the configured congestion
threshold.