Service manual

3-54
Intrepid® 6140 Director Installation and Service Manual
Maintenence Analysis Procedures
12
Reset the product ( IML, IPL, or Reset the Director on page 4–38 ).
Was the maintenance action successful?
NO YES
↓ The fabric, ISL, and product are operational. Exit MAP.
Perform a data collection and contact the next level of support.
Exit MAP.
13
An E_Port segmented because no product in the fabric is capable of
becoming the principal switch.
a. Inform the customer the product will be set offline. Ensure the
system administrator quiesces Fibre Channel frame traffic and
sets attached devices offline.
b. Set the product offline (
Setting the Director Online or Offline on
page 4–36
).
c. For the product reporting the problem:
— EFCM Basic Edition - Select
Switch and Fabric Parameters
from the Configure menu at any view. The Fabric
Parameters View
displays.
— Element Manager - Select
Operating Parameters and
Fabric Parameters from the Configure menu at any view.
The
Configure Fabric Parameters dialog box displays.
d. At the
Switch Priority field, select Principal , Never Principal ,or
Default , then click OK or Activate . The switch priority value
designates the fabric’s principal switch, which is assigned a
priority of 1 and controls the allocation and distribution of domain
IDs for all fabric elements (including itself).
Principal is the highest priority setting, Default is the next
highest, and
Never Principal is the lowest priority setting. The
setting
Never Principal means the fabric element is incapable of
becoming a principal switch. If all elements are set to
Principal or
Default , the element with the highest priority and the lowest
WWN becomes the principal switch. At least one element in a
multiswitch fabric must be set as
Principal or Default .Ifall
elements are set to
Never Principal , all ISLs segment.
e. Set the product online (
Setting the Director Online or Offline on
page 4–36
).