Service manual

3-52
Intrepid® 6140 Director Installation and Service Manual
Maintenence Analysis Procedures
Was the maintenance action successful?
NO YES
↓ The fabric, ISL, and product are operational. Exit MAP.
Contact the next level of support. Exit MAP.
9
An E_Port segmented because two fabric elements had duplicate
domain IDs.
a. Determine the desired domain ID (1 through 31 inclusive) for
each product.
b. Inform the customer both products will be set offline. Ensure the
system administrator quiesces Fibre Channel frame traffic and
sets attached devices offline.
c. Set both products offline (
Setting the Director Online or Offline
on page 4–36
).
d. For the first product reporting the problem:
— EFCM Basic Edition - Select
Switch and Parameters from
the
Configure menu at any view. The Parameters View
displays.
— Element Manager - Select
Switch Parameters and Fabric
Parameters
from the Configure menu at any view. The
Configure Switch Parameters dialog box displays.
e. Type the customer-determined preferred domain ID value, then
click
OK or Activate .
f. Repeat steps d and e at the second product (attached to the
segmented E_Port). Use a different preferred domain ID value.
g. Set both products online (
Setting the Director Online or Offline
on page 4–36
).
Was the maintenance action successful?
NO YES
↓ The fabric, ISL, and product are operational. Exit MAP.
Contact the next level of support. Exit MAP.