Service manual

3-34
Intrepid® 6140 Director Installation and Service Manual
Maintenence Analysis Procedures
MAP 0500: Port Failure or Link Incident Analysis
This MAP describes fault isolation for small form factor pluggable
(SFP) optical transceivers and Fibre Channel link incidents. The
failure indicator is:
• Event codes observed at the Event Log (EFCM Basic Edition or
Element Manager interface).
• Event codes observed at the console of an open systems
interconnection (OSI) serverattached totheproduct reporting the
problem.
• An error message observed at the Link Incident Log (EFCM Basic
Edition or Element Manager interface).
1
Table 3-9 lists event codes, explanations, and MAP steps.
Table 3-9 MAP500:EventCodes
Event
Code
Explanation Action
080 Unauthorized worldwide name. Go to step 3.
081 Invalid attachment. Go to step 17.
504 Port card failure. Go to step 5.
505 Port card revision not supported. Go to step 18.
506 Fibre Channel port failure. Go to step 4.
507 Loopback diagnostics port failure. Go to step 19.
512 SFP/XFP optical transceiver nonfatal error. Go to step 4.
514 SFP/XFP optical transceiver failure. Go to step 4.
581 Implicit incident. Go to step 22.
582 Bit error threshold exceeded. Go to step 22
583 Loss of signal or loss of synchronization. Go to step 22.
584 Not operational primitive sequence received. Go to step 22.
585 Primitive sequence timeout. Go to step 22.