Service manual

Maintenance Analysis Procedures
3-3
Maintenence Analysis Procedures
060 Fabric controller unable to synchronize databases. Go to MAP 0600.
061 Fabric Controller database invalid. Go to MAP 0600.
062 Maximum interswitch hop count exceeded. Go to MAP 0600.
063 Remote switch has too many ISLs. Go to MAP 0600.
064 ESS response from indicated domain ID not received after
maximum tries.
No action required.
070 E_Port is segmented. Go to MAP 0600.
071 Switch is isolated. Go to MAP 0600.
072 E_Port connected to unsupported switch. Go to MAP 0600.
073 Fabric initialization error. Go to
Collecting Maintenance Data on page 4–32 .
074 ILS frame delivery error threshold exceeded. Go to
Collecting Maintenance Data on page 4–32 .
075 E_Port segmentation recovery. No action required.
080 Unauthorized worldwide name. Go to MAP 0500.
081 Invalid attachment. Go to MAP 0500
082 Port fenced. Go to MAP 0600.
083 Port set to inactive state. Go to MAP 0500
090 Database replication time out. Go to
Collecting Maintenance Data on page 4–32 .
091 Database replication discontinued. Go to Collecting Maintenance Data on page 4–32 .
120 Error detected while processing system management command. Go to
Collecting Maintenance Data on page 4–32 .
121 Zone set activation failed - zone set too large. Reduce size of zone set and retry.
140 Congestion detected on an ISL. Go to MAP 0600.
141 Congestion relieved on an ISL. No action required.
142 Low BB_Credit detected on an ISL. Go to MAP 0600.
143 Low BB_Credit relieved on an ISL. No action required.
150 Fabric merge failure. Go to MAP 0600.
Table 3-3 Event Codes versus Maintenance Action (Continued)
Event
Code Explanation Action