Service manual

2
Installation Tasks
2-71
Installation Tasks
and verified while performing Task 14: Record or Verify Server Restore
Information.
To back up server configuration data and create a base restore CD:
1. Insert a blank rewritable CD into the CD-RW drive and format
the CD:
a. At the Windows desktop, locate the InCD icon (1) at the right
side of the task bar (Figure 2-36).The icon is indicated by ared
down arrow.
b. Right-click the icon and select Format (F).Thefirstwindowof
the InCD wizard displays.
c. Click Next to proceed to the second window of the InCD
wizard. Use default parameters displayed at each window,
and click Next and Finish as appropriate to complete the CD
formatting task.
d. When the rewritable CD is formatted, the red down arrow
associated with the InCD icon changes to a green up arrow.
Figure 2-36 InCD Icon (Unformatted CD)
2. Back up the director configuration file to the server (Managing
Configuration Data on page 4-50).
3. Close the Element Manager application and return to the SAN
management application.
4. Close the SAN management application by selecting Shutdown
from the SAN menu. A SANavigator or EFCM Message dialog box
displays. Click Ye s to close the application.
5. Reboot the server to cause directory contents to be written to the
blank CD:
a. At the Windows desktop, click Start attheleftsideofthetask
bar (bottom of the desktop), then select Shut Down.TheShut
Down Windows dialog box displays.