Service manual

2
2-68
Intrepid® 6140 Director Installation and Service Manual
Installation Tasks
1. Minimize the Element Manager application and return to the
SAN management application.
2. At the SANavigator or EFCM main window, select Event
Notification and Call Home from the Monitor menu. The Call Home
Event Notification Setup dialog box displays.
3. Click the Enable Call Home Event Notification check box. A check
mark appears to indicate call-home event notification is enabled.
NOTE: The enable function must be activated for each product through
the Element Manager application.
4. Click Send Test. A call-home test message is sent.
5. Click OK to close the dialog box.
6. Maximize the Element Manager application.
7. Select Enable Call Home Notification from the Maintenance menu at
any view. A check mark appears to indicate call-home event
notification is enabled.
Configure Security
This section describes optional product security features configured
throughtheSANmanagementorElementManagerapplications.The
enhanced SANtegrity PFE keys (SANtegrity authentication and
SANtegrity binding) must be installed (Install PFE Keys (Optional) on
page 2-25). Features include:
• SANtegrity authentication - Select SANtegrity Authentication
from the Configure menu at the ElementManagerapplication. The
SANtegrity Authentication dialog box provides five pages (tabs) to
configure optional authentication features, including:
— Users - Configure password-protected administrator and
operator access to the SAN management and Element
Manager applications.
— Software - ConfigureCHAP-controlled management interface
access (out-of-band and inband) to the product.
— Devices - Configure a CHAP secret authentication sequence
for nodes(devices) attached totheproduct throughE_Portsor
N_ports.