Service manual

2
Installation Tasks
2-67
Installation Tasks
11. Click Send Test Email.Atestmessageissenttoconfigured
recipients.
12. Click OK to save the information and close the dialog box.
13. Maximize the Element Manager application.
14. Select EnableE-Mail Notification fromthe Maintenance menuatany
view. Acheck mark appears to indicate e-mail notification for the
product is enabled.
NOTE: The enable function must be activated for each product through
the Element Manager application.
Configure and Enable Ethernet Events
Perform this procedure to configure and enable Ethernet events. An
Ethernet event is recorded (after a user-specified time interval) when
the director-to-management server communication link drops. To
configure and enable Ethernet events:
1. Minimize the Element Manager application and return to the
SAN management application.
2. At the SANavigator or EFCM main window, select Ethernet Event
from the Monitor menu. The Configure Ethernet Events dialog box
displays.
3. Click the Enable Ethernet Events checkbox.Acheckmarkappears
to indicate Ethernet events are enabled.
4. At the Ethernet Timeout field, typea value between 10 through 120
minutes.
5. Click OK to close the dialog box.
Configure, Enable, and Test Call-Home Event Notification
Telephone numbers and other information for the call-home feature
are configured through the Windows dial-up networking application
(Task 11: Configure the Call-Home Feature (Optional) on page 2-46). To
configure, enable, and test call-home event notification:
NOTE: The call-home feature maynot be available if the EFCM Lite
application is installed on a customer-supplied platform.