Service manual

2
2-66
Intrepid® 6140 Director Installation and Service Manual
Installation Tasks
2. At the SANavigator or EFCM main window, select Event
Notification and Email from the Monitor menu. The Email Event
Notification Setup dialog box displays (Figure 2-35).
Figure 2-35 Email Event Notification Setup Dialog Box
3. To enable e-mail transmission to configured addresses, click the
Enable Email Event Notification checkbox.Acheckmarkappears
when transmission is enabled.
4. Type the IP address or DNS host name of the SMTP server in the
E-mail Server field.
5. Type the e-mail address to which replies should be sent in the
Reply Address field.
6. At the Summary Interval field, type the length of time the
application should wait between notifications. Choose seconds,
minutes,orhours from the associated drop-down list.
7. To specify users for notification,click User List.TheSANavigator
Server Users or EFCM Server Users dialog box displays.
8. To enable notification for a user, click the check box in the Email
column. An unchecked box indicates e-mail notification is not
enabled.
9. Click OK to close the SANavigator Server Users or EFCM Server
Users dialog box.
10. At the E-mail Test Options field, select the Send to radio button
(andtyperecipientIP addressesintheadjacentfield),orselect the
Send to all users enabled for notification radio button.