Service manual

2
Installation Tasks
2-65
Installation Tasks
12. Click Finish.TheConfigure Threshold Alerts dialog box reappears
listing the name, type, and state of the alert configured.
13. To activate the alert, highlight (select) the alert and click Activate.
Figure 2-34 New Threshold Alert Dialog Box (Screen 3)
Enable EFCM Basic Edition and Telnet Access
Perform this procedure to enable EFCM Basic Edition interface and
Telnet access through the maintenance port. To enable the functions:
1. To enable the EFCM Basic Edition interface, select Enable Web
Server from the Configure menu at any view. A check mark
appears when the interface is enabled, and the menu closes.
2. To enable Telnet access, select Enable Telnet from the Configure
menu at any view. A check mark appears when access is enabled,
and the menu closes.
Configure, Enable, and Test E-mail Notification
Perform this procedure to configure, enable, and test e-mail and
simple mail transfer protocol (SMTP) addresses to receive event
notifications. Configuration and test are performed at the SAN
management application. E-mail notification is enabled at the
Element Manager application. To perform the procedures:
1. Minimize the Element Manager application and return to the
SAN management application.