Service manual

2
2-64
Intrepid® 6140 Director Installation and Service Manual
Installation Tasks
Figure 2-33 New Threshold Alert Dialog Box (Screen 2)
6. Type a value from 1 through 100 in the % utilization field. When
throughput reaches the specified percentage of port capacity, a
threshold alert occurs.
7. Enter the cumulative minutes for which the % utilization should
exist during the notification interval before an alert is generated.
Select the At any time radio button to specify that an alert occur
when the % utilization is reached. The valid range is 1 to the
interval set in the following step.
8. Enter the interval (in minutes) during which throughput is
measured and threshold notifications can occur. The valid range
is 5 through 70560 minutes.
9. Click Next. The New Threshold Alert dialog box (screen 3) displays
(Figure 2-34).
10. Select the Port Type or Port List radio button.
•SelectthePort Type radio button, then the E_Ports, F_Ports,or
FL_Ports radio button to cause an alert to generate for
configured ports.
•SelectPort List to configure individual ports by clicking the
check box adjacent to each port number. Select Set All Ports to
place a check mark adjacent to all port numbers.
11. Click Next. The New Threshold Alert dialog box (screen4) displays
a summary of the alert configuration. To make changes, move
back and forth through the configuration screens by selecting
Previous or Next.