Service manual

2
Task 18: Set Product Date and Time
2-57
Installation Tasks
NOTE: Implementing host control requires installation of a SAN
management application on the OSI server. Management applications
include Veritas
®
SANPoint™ Control or Tivoli
®
NetView
®
.
To configure the management server, use the following steps:
1. Select Open Systems Management Server from the Configure menu
at any view. Two submenu options display:
• Enable OSMS.
• Host Control Prohibited.
2. Enable or disable OSMS by selecting the Enable OSMS option.
Check the box to enable the server.
3. Allow or prohibit host (OSI server) control by selecting the Host
Control Prohibited option. Check the box to prohibit a host
management program from changing configuration and
connectivity parameters on the product. The host program has
read-only access to configuration and connectivity parameters.
Task 18: Set Product Date and Time
Log entries are stamped with the date and time received from the
product. To set the effective date and time for the product:
1. Select Date/Time from the Configure menu (Configure>Date/Time).
The Configure Date and Time dialog box appears (Figure 2-27).
Date and time can be set manually, or set to be periodically
updated by the SAN management application (the product and
application synchronize at least once daily).