Service manual

2
Task 13: Configure the Product to the Management Application
2-51
Installation Tasks
Task 13: Configure the Product to the Management Application
To manage a new product, it must be identified to and discovered by
the SAN management application. To identify the product use the
following steps:
1. Select Setup from the Discover menu (Discover>Setup). The
Discover Setup dialog box appears.
2. Click Add. The Address Properties dialog box appears with the IP
Address page open by default (Figure 2-24).
Figure 2-24 Address Properties Dialog Box (IP Address Page)
3. Type a product description in the Description field.
4. Type the product IP address (determined by the customer) in the
IP Address field.
5. Type the product subnet mask (determined by the customer) in
the Subnet Mask field.
6. Click OK to save the entered information and define the switch to
the SAN management application. Close all dialog boxes and
return to the EFCM main window.