Service manual

2
Task 12: Assign User Names and Passwords
2-49
Installation Tasks
1. There are two jacks on the server internal modem: one for the
call-home connection (LINE), and the other for a telephone
(PHONE). Ensure a telephone cable is routed and connected to
the LINE jack at the rear of the management server (connected
while performing Task 6: Unpack, Inspect, and Install the
Management Server).
2. Double-click the Call Home Configuration icon at the Windows
desktop. The Call Home Configuration dialog box appears.
3. Enter the telephone number for the technical support center
(800-752-4572) at the Call Center Phone Number field. Include
necessary information, such as the country code, area code, or
any prefix required to access a telephone line outside the facility.
4. Enter the telephone number for access to the local server at the
Local Phone Number field. Include necessary information such as
the country code or area code.
5. Click OK to save the configured telephone numbers and close the
dialog box.
Task 12: Assign User Names and Passwords
In addition to password access for the Windows operating system,
users must be configured for SAN management application access.
To assign application user names and passwords use the following
steps:
1. The EFCM Log In dialog box appears at the Windows desktop.
The dialog box was opened when performing Task 8: Configure
Management Server Information.
2. Type the SAN management application default user ID and
password and select a server or IP address from the Network
Address drop-down list.
NOTE: The default user ID is Administrator and the default password is
password. Both are case-sensitive.
3. Click Login. The application opens and the EFCM main window
appears.
4. Select Users from the SAN menu. The EFCM Server Users dialog
box appears.