Service manual

2
Task 10: Set Management Server Date and Time
2-47
Installation Tasks
1. Open the system properties dialog box from the Windows
desktop (Start>Settings>Control Panel>Date/Time). The Date/Time
Properties dialog box appears with the Date & Time page open.
NOTE: The Time Zone field must be set before the Date & Time field.
2. Click the Time Zone tab. The Date/Time Properties dialog box
appears with the Time Zone page open (Figure 2-21).
Figure 2-21 Date/Time Properties Dialog Box (Time Zone Tab)
3. To change the time zone use the following steps:
a. Select the appropriate time zone from the drop-down list at
the top of the dialog box.
b. If instructed by the customer, select the Automatically adjust
clock for daylight saving changes check box.
c. Click Apply. Record time zone and daylight savings
information for reference if the server hard drive fails and
must be restored.
4. Click the Date & Time tab. The Date/Time Properties dialog box
appears with the Date & Time page open (Figure 2-22).