Service manual

2
2-44
McDATA Sphereon 4400 Fabric Switch Installation and Service Manual
Installation Tasks
8. Close dialog boxes as appropriate and return to the The Network
and Dial-up Connections window.
9. Record the changed gateway and DNS server addresses for
reference if the server hard drive fails and must be restored.
10. To optionally configure addresses for the public LAN connection
(LAN 1), double-click the Local Area Connection 1 icon and repeat
step 2 through step 9.
11. Close all dialog boxes and return to the Windows desktop.
12. Reboot the server and Access the Management Server Desktop.
Task 9: Configure Windows Operating System Users
Configure password access for all authorized Windows (server)
users. It is also recommended to change the default administrator
password. To configure users:
1. Open the system properties dialog box from the Windows
desktop (Start>Settings>Control Panel>Users and Passwords). The
Users and Passwords dialog box appears.
2. The Guest user name is a built-in account in the Windows
operating system and cannot be deleted. The srvacc account is for
field service users and must not be modified or deleted.
Change Default
Administrator
Password
To change the administrator password from the default (password)
to a customer-specified password:
1. Click Set Password at the Users and Passwords dialog box. The Set
Password dialog box appears.
2. Confirm New Password fields at the New Password and, type the
new password. Both fields are case-sensitive.
3. Click OK. The default administrator password changes and the
Set Password dialog box closes.
Add a New User
To set up a new Windows user:
1. Click Add at the Users and Passwords dialog box, . The first
window of the Add New User wizard appears (Figure 2-19).