Service manual

2
Task 8: Configure Management Server Information
2-43
Installation Tasks
4. In the Components checked are used by this connection field,
double-click the Internet Protocol (TCP/IP) entry. The Internet
Protocol (TCP/IP) Properties dialog box appears (Figure 2-18).
Figure 2-18 Internet Protocol (TCP/IP) Properties Dialog Box
5. The Use the following IP address radio button is enabled and the IP
address and Subnet mask fields display network information
configured while performing Task 7: Configure Server Password and
Network Addresses.
6. Enter the gateway address obtained from the customer at the
Default gateway field.
7. Select (enable) the Use the following DNS server addresses radio
button. At the Preferred DNS server field, enter the DNS server IP
address obtained from the customer, then click OK to apply the
changes and close the dialog box.