Service manual

2
Task 4: Configure Product at the EFCM Basic Edition Interface (Optional)
2-25
Installation Tasks
Click Enable to enable SSH. Click Disable to disable the SSH. When
SSH is enabled, only SSH is allowed, and all data sent over the
connection is encrypted. When the SSH is disabled, only Telnet is
allowed, and the data is not encrypted.
Enable or Disable
Host Control
Folllow the procedure in this section to configure the open systems
management server and enable OSI host control of the product.
Implementing and enabling OSI host control requires installation of a
SAN management application on the OSI server. Applications
include Veritas
®
SANPoint™ Control or Tivoli
®
NetView
®
.
To enable or disable OSMS host control:, use the following steps
1. Select OSMS from the Configure menu (Configure>OSMS). The
OSMS View appears (Figure 2-12).
Figure 2-12 OSMS View
2. Perform one of the following:
•Click Enable to activate OSMS.
•Click Disable to deactivate OSMS.
3. Click the Enable Host Control check box to activate host control of
the product.
4. Click OK to save and activate changes.
Configure SSL
Encryption
SSL is a protocol that encrypts internet communications. The protocol
uses key encryption and includes a digital certificate that enables
server authentication and SSL session initialization.
To configure SSL encryption, use the following steps: