Service manual

2-20

McDATA Sphereon 4400 Fabric Switch Installation and Service Manual

Installation Tasks

Figure 2-8 Network View

a. Type a value in the IP Address field (default is 10.1.1.10).

b. Type a value in the Subnet Mask field (default is 255.0.0.0).

c. Type a value in the Gateway Address field (default is 0.0.0.0).

2. Click OK to save and activate changes.

An acknowledgement message appears, indicating the browser

PC must be directed to the new IP address.

3. Update the address resolution protocol (ARP) table for the

browser PC.

a. Close the EFCM Basic Edition interface and all browser

applications.

b. Open the command prompt (DOS) on your Windows desktop.

c. Delete the switch’s old IP address from the ARP table. At the

command (C:\) prompt, type arp -d xxx.xxx.xxx.xxx, where

xxx.xxx.xxx.xxx is the old IP address for the switch.

d. Close the command prompt window and return to the

Windows desktop.

4. Perform a power-on reset (POR) (IML or Reset Switch).

5. Open the browser (Internet Explorer or Netscape Navigator) on

your PC. Enter the new IP address of the product as the URL. The

Enter Network Password dialog box appears.